Press Brake

Dozerash

Member
Messages
19
Good Post Points
2
Location
Upstate, NY
Welder
Hobart 210, Primeweld 520, Miller Thunderbolt, Wards 230
Anyone build a press brake for a 12 ton hf press? They look fairly simple to build . Looking for ideas. Thanks
 

dave_dj1

Active member
Messages
26
Good Post Points
9
I built mine a few years ago, 19.5" wide. I used a piece of 6" x 3/8" flat bar which I beveled the edge for the knife, a piece of 2.5" x 1/4" angle for the die. I have a 20 ton air over hydraulic jack to run it. I can get a pic tomorrow if you would like, it' not fancy but has been used a lot, I built a swinging arm to support longer things, I have pressed bushings out of leaf springs, changed u-joints and made a slip on 4 way wedge for my log splitter. Sometimes it's scary listening to it groan!
 

Dozerash

Member
Messages
19
Good Post Points
2
Location
Upstate, NY
Welder
Hobart 210, Primeweld 520, Miller Thunderbolt, Wards 230
I built mine a few years ago, 19.5" wide. I used a piece of 6" x 3/8" flat bar which I beveled the edge for the knife, a piece of 2.5" x 1/4" angle for the die. I have a 20 ton air over hydraulic jack to run it. I can get a pic tomorrow if you would like, it' not fancy but has been used a lot, I built a swinging arm to support longer things, I have pressed bushings out of leaf springs, changed u-joints and made a slip on 4 way wedge for my log splitter. Sometimes it's scary listening to it groan!



That sounds like just what I want to build! Post some pictures if you can.
Thanks
 

Viny

Member
Messages
15
Good Post Points
2
Location
Oklahoma
Welder
Miller 211
As an option, if you don't want to start from scratch, Swagoffroad.com sells kits that you assemble. I got the 20ton kit and love it. Good luck!
 

jjef

Active member
Messages
34
Good Post Points
22
Location
Mi
Welder
Hobart 210, lx 235, Lincoln 140c
Here's mine I built for for 20 ton hf press made with pretty heavy duty cutoffs.
 

Attachments

  • KIMG1513.JPG
    KIMG1513.JPG
    149.1 KB · Views: 25
  • KIMG1512.JPG
    KIMG1512.JPG
    240 KB · Views: 26
Top