Snowmobile stands.

jjef

Active member
Messages
34
Good Post Points
22
Location
Mi
Welder
Hobart 210, lx 235, Lincoln 140c
Made these stands to winch the track of a snowmobile in the air, after I had neck surgery 5 or so years ago. Used two old boat trailer winches had to shorten the crank handles, made of repurposed angle, thin wall tube, and square tubing. Made in a day, got lazy and broke a dull drill bit so I welded the casters to bottom. Brush painted with black Rust-Oleum. So much better than previous methods of lifting back and balancing a 2x to support track. Also easier to adjust track, replace slides etc.
 

Attachments

  • KIMG1733.JPG
    KIMG1733.JPG
    350 KB · Views: 9
  • KIMG1734.JPG
    KIMG1734.JPG
    274.6 KB · Views: 8
  • KIMG1735.JPG
    KIMG1735.JPG
    383.7 KB · Views: 8
  • Good Post
Reactions: MC
Top