***Win a Welder*** May 2020 Contest

MC

Administrator
Staff member
Messages
151
Good Post Points
59
Location
San Diego
We are excited to announce our first ever WeldingSite contest!

Starts now and ends May 31, 2020...

1st Prize: $500 toward the welder of your choice!
2nd Prize: $100 amazon gift card!
3rd Prize: Rapicca Welding Gloves (3 winners!)

There are FIVE ways to enter and each person can earn up to 15 entries!

1. Join weldingsite.com +1 entry (Existing members entered automatically)
2. Post a project THREAD (active, completed, or planned projects are allowed) at weldingsite.com +2 entries
3. Refer a new member to weldingsite.com +3 entries (click here to get your referral link)
4. Post a Link to WeldingSite on your Facebook page (after posting, reply to this thread or PM me a link to your profile to verify) +4 entries
5. Post 10+ messages to weldingsite.com in May 2020 +5 entries

Total if you do all 5 things = 15 entries!


Let the games begin!!!

contest.jpg

Contest Rules:

No purchase is necessary to participate. The maximum number of steps required to complete your participation is one (account registration at www.weldingsite.com). The maximum amount of money you will be asked to pay to participate is $0. The maximum amount of money the winner will be asked to pay to receive the prize is $0. The contest will terminate on May 31, 2020. The prizes will be sent out within 14 days of contest termination.

Must be 18 years or older to enter. Contest is not affiliated with Amazon, Facebook, Rapicca, or any other company other than www.weldingsite.com. Contest Ends May 31, 2020 and all entries must be received by May 31, 2020.

Cost of shipping prizes outside of the United States will be the responsibility of the winner or the winner may select a cash value prize to be delivered via paypal as follows:

First prize: US$500
Second prize: US$100
Third prize: US$20

Winners will be selected on June 1, 2020 using the following method:

Each entry will be assigned a unique numerical code and attached to the entrant's WeldingSite.com username. A drawing of these unique code/username combinations will be used to determine winners. For example:

01username
02username
03username
04username
05username

After a number/username is drawn as a winner, all entries containing the winning username will be removed from the drawing lot. The maximum number of prizes each person can win is one.

One (1) entry code will be given to each person who registers a user account at www.weldingsite.com during the month of May, 2020. Limit one user account per person.

Two (2) entry codes will be given to each person who posts a project thread at www.weldingsite.com/projects during the month of May, 2020. Limit one eligible project thread per person. Any project threads removed by moderators for violating www.weldingsite.com rules will not be counted.

Three (3) entry codes will be given to each person who refers a new member to www.weldingsite.com during the month of May, 2020 using "your referral link" which is available at https://weldingsite.com/referrals/. Limit one eligible referral per person.

Four (4) entry codes will be given to each person who posts a link to any page on www.weldingsite.com on their personal Facebook page or a Facebook business page during the month of May, 2020. After posting, the entrant must either reply to this thread with a link to the Facebook post or send a private message to MC to verify the post and earn the entries. Limit one post per person.

Five (5) entry codes will be given to each person who posts 10 or more total messages (inclusive of posts and threads) to www.weldingsite.com during the month of May, 2020. Limit 5 entry codes per person. Any posts removed by moderators for violating www.weldingsite.com rules will not count toward the 10 posts.

A maximum total of fifteen (15) entry codes can be earned by each person for this contest, to increase their chances of winning.

You must be a WeldingSite.com member to participate.
 

MC

Administrator
Staff member
Messages
151
Good Post Points
59
Location
San Diego
This post will be reserved to list users who have met criteria for additional entries!

-------------------------
1. Join weldingsite.com +1 entry (Existing members entered automatically)

All members will meet this criteria.
-------------------------

2. Post a project THREAD +2 entries

Qualified members:

@10of12
@AP
@Aczlan
@Avman63
@Avrotom
@Bearskinner
@Bigworm
@Buckshott
@CADplans
@CA_Bgrwldr
@CB
@CFB
@Catsupdog
@CourtenayBoy
@Craig
@Dan's welding something
@Dcurtis
@Don_
@Dozerash
@Dr. Righteous
@Fabrication Fan
@Flybynightwelder
@Gcaldicott
@JWeir
@James
@Jp
@Kidbuffalo
@Maury J
@Meleon
@Metalworkshed22
@Mighack
@Nathan902
@Norm W
@Oldtoad
@PILOON
@Qapla
@Redneck engineer
@Scott
@ScrapFab
@Sherwood
@Weldingisfun
@aussiebushman
@barts
@bergie
@bigb
@coupman35
@cpufixerjr
@dadz34
@dave_dj1
@downsizingnow48
@dstig1
@elcheapo
@g0liath
@h82crash
@handgun357
@joatmon
@jposey4564
@kbeitz
@kenmbz
@olddude
@phastmac
@qtrflash



-------------------------
3. Refer a new member to weldingsite.com +3 entries (click here to get your referral link)

Qualified members:

@dstig1
@Aczlan
@mikei80x86
@Sherwood
@scram
@barryrei

-------------------------

4. Post a Link to WeldingSite on your Facebook page (after posting, reply to this thread or PM me a link to your profile to verify) +4 entries

@LtMike
@Alwims
@RedEye2020
@Dcurtis
@RenoHuskerDu
@Sherwood
@Bigworm
@qtrflash
@lojo16
@Aczlan
@skyking

-------------------------

5. Post 10+ messages to weldingsite.com in May 2020 +5 entries

@PILOON
@Bearskinner
@Old Irish
@Lis2323
@bplayer405
@Yomax4
@California
@Don_
@CA_Bgrwldr
@welding seabee
@SIO
@coupman35
@dave_dj1
@dstig1
@qtrflash
@Beerslayer
@CB
@kenmbz
@dwross
@poncho62
@Aczlan
@Fedup
@Sherwood
@propane1
@downsizingnow48
@Bigworm
@JWeir
@axeman79
@cwby
@dadz34
@Craig
@Gary Fowler

-------------------------
 
Last edited:

Daveifling

New member
Messages
1
Good Post Points
2
Location
Little Rock
Welder
Lincoln
I recently bought a CV250 Lincoln welder through an online auction, not realizing it was three-phase. I don’t have three-phase power. Anyone want to buy it, and the LN-7 wire feeder for a steal?
 

Dave

New member
Messages
1
Good Post Points
0
Location
Chilton WI
Welder
P&H stick welder and a Lincoln wire feed 120 volt
Davefliling, you don`t need to get rid of a 3 phase equipment. There is a lot of older motor drives around the country. My son buys 3 phase equipment and hooks the to a old drive that takes single phase and turns it into 3 phase at the output. 3 phase motors run cheaper, cooler and are smaller in size to a single phase motor.
 

Qapla

New member
Messages
2
Good Post Points
0
Location
Florida
Welder
Wire and Stick
We have an old stick welder that we have not been able to get the parts we need to get it back working .. maybe one day
 

wjaquith

New member
Messages
3
Good Post Points
0
Location
Northern New York
Welder
2 Lincoln SA200's ; Lincoln Ideal Arc 250; Lincoln SP250 GMAW; Lincoln SP125 GMAW
Daveifling, I agree with Dave- a phase converter is a good way to run 3ph equipment on 1ph power. It's worth looking into. You'll need to know how much power you need for each tool you'll be running ( ie total 3ph power needed) to size an appropriate converter. Good luck!
 

wjaquith

New member
Messages
3
Good Post Points
0
Location
Northern New York
Welder
2 Lincoln SA200's ; Lincoln Ideal Arc 250; Lincoln SP250 GMAW; Lincoln SP125 GMAW
Currently repairing a dump trailer and repairing a Backhoe bucket. Fabricating parts, air arcing and hard surfacing and a ton of welding...Luving it!
 

Alwims

New member
Messages
1
Good Post Points
0
Location
Wheatland, Missouri
Welder
Clark 140
We are excited to announce our first ever WeldingSite contest!

Starts now and ends May 31, 2020...

1st Prize: $500 toward the welder of your choice!
2nd Prize: $100 amazon gift card!
3rd Prize: Rapicca Welding Gloves (3 winners!)

There are FIVE ways to enter and each person can earn up to 15 entries!

1. Join weldingsite.com +1 entry (Existing members entered automatically)
2. Post a project THREAD (active, completed, or planned projects are allowed) at weldingsite.com +2 entries
3. Refer a new member to weldingsite.com +3 entries (click here to get your referral link)
4. Post a Link to WeldingSite on your Facebook page (after posting, reply to this thread or PM me a link to your profile to verify) +4 entries
5. Post 10+ messages to weldingsite.com in May 2020 +5 entries

Total if you do all 5 things = 15 entries!


Let the games begin!!!

View attachment 259

Contest Rules:

No purchase is necessary to participate. The maximum number of steps required to complete your participation is one (account registration at www.weldingsite.com). The maximum amount of money you will be asked to pay to participate is $0. The maximum amount of money the winner will be asked to pay to receive the prize is $0. The contest will terminate on May 31, 2020. The prizes will be sent out within 14 days of contest termination.

Must be 18 years or older to enter. Contest is not affiliated with Amazon, Facebook, Rapicca, or any other company other than www.weldingsite.com. Contest Ends May 31, 2020 and all entries must be received by May 31, 2020.

Cost of shipping prizes outside of the United States will be the responsibility of the winner or the winner may select a cash value prize to be delivered via paypal as follows:

First prize: US$500
Second prize: US$100
Third prize: US$20

Winners will be selected on June 1, 2020 using the following method:

Each entry will be assigned a unique numerical code and attached to the entrant's WeldingSite.com username. A drawing of these unique code/username combinations will be used to determine winners. For example:

01username
02username
03username
04username
05username

After a number/username is drawn as a winner, all entries containing the winning username will be removed from the drawing lot. The maximum number of prizes each person can win is one.

One (1) entry code will be given to each person who registers a user account at www.weldingsite.com during the month of May, 2020. Limit one user account per person.

Two (2) entry codes will be given to each person who posts a project thread at www.weldingsite.com/projects during the month of May, 2020. Limit one eligible project thread per person. Any project threads removed by moderators for violating www.weldingsite.com rules will not be counted.

Three (3) entry codes will be given to each person who refers a new member to www.weldingsite.com during the month of May, 2020 using "your referral link" which is available at https://weldingsite.com/referrals/. Limit one eligible referral per person.

Four (4) entry codes will be given to each person who posts a link to any page on www.weldingsite.com on their personal Facebook page or a Facebook business page during the month of May, 2020. After posting, the entrant must either reply to this thread with a link to the Facebook post or send a private message to MC to verify the post and earn the entries. Limit one post per person.

Five (5) entry codes will be given to each person who posts 10 or more total messages (inclusive of posts and threads) to www.weldingsite.com during the month of May, 2020. Limit 5 entry codes per person. Any posts removed by moderators for violating www.weldingsite.com rules will not count toward the 10 posts.

A maximum total of fifteen (15) entry codes can be earned by each person for this contest, to increase their chances of winning.

You must be a WeldingSite.com member to participate.
This post will be reserved to list users who have met criteria for additional entries!

-------------------------
1. Join weldingsite.com +1 entry (Existing members entered automatically)

All members will meet this criteria.
-------------------------

2. Post a project THREAD +2 entries

Qualified members:

@Buckshott
@Maury J
@kbeitz

@dave_dj1
@StuckRod
@James
@Qapla
@joatmon
@Sherwood
@CourtenayBoy

-------------------------
3. Refer a new member to weldingsite.com +3 entries (click here to get your referral link)

Qualified members:

-------------------------

4. Post a Link to WeldingSite on your Facebook page (after posting, reply to this thread or PM me a link to your profile to verify) +4 entries

@LtMike

-------------------------

5. Post 10+ messages to weldingsite.com in May 2020 +5 entries

-------------------------
 

JKR

New member
Messages
3
Good Post Points
0
Location
New York
Welder
lincoln Mig and stick
Put me in to win a welder. THis should be a fun site :)
 

corokid

New member
Messages
1
Good Post Points
1
Location
Rochester NH
Welder
Arc one Hobart mig
I could use a bigger welder for projects like building a small Chinese Quad with a prediter 6.5 motor and Chevy truck from a power wheel or mini bike build with some power adders what ever it takes to have fun.It looks like we can`t tractor pull this summer yet or ATV
 
  • Good Post
Reactions: MC
Top