Recent content by panamaguy

Just remember 7018 rod must be dry. If need be put them in the oven next time something is being baked. And 6010 /6011 need some moisture, often I will take a hand full and quickly run them under a tap before I use them. Professional welder my whole life.

Build a cattle guard. Then you do not have to open a gate and at the same time the cows will not cross it

Should have used real wheel studs. 3 Is lots and one of them would be from a early Dodge from the left hand side of the vehicle. They used left hand thread on the left side and right hand on the right side. The thieves get 2 lugnuts off but never the third. The more they try the tighter they...

Looks real good. Maybe you found your calling. Making snow blades all summer and relaxing all winter in the Caribbean

If you are going to build a alum boat get a spool gun for you mig. TIG is great but not for something as big a a boat. TIG is real slow so you would take forever to make the boat

If it is hyd tubing I would silver solder it. You can get silver solder that has the flix coating the same as brazing rod. Get a 1/16 rod and clean it super clean and just solder it . You can also use this rod to fix any dents in the chrome shaft on hyd cylinders. 1 use new gringing disc that...